SPESIFIKASI
| Measurement functions | Measurement range | Display range | Resolution | Accuracy |
|---|---|---|---|---|
| Fault loop impedance | ||||
| Fault loop ZL-PE, ZL-N, ZL-L | 0.13 Ω…1999 Ω acc. to IEC 61557 | 0.00 Ω…1999 Ω | from 0.01 Ω | ±(5% m.v. + 3 digits) |
| Fault loop ZL-PE in RCD mode | from 0.5 Ω…1999 Ω acc. to IEC 61557 | 0.00 Ω…1999 Ω | from 0.01 Ω | from ±(6% m.v. + 5 digits) |
| Measurements of RCD parameters | ||||
| RCD tripping test and measurement of tripping time tA measuring current 0,5 IΔn, 1 IΔn, 2 IΔn, 5 IΔn | ||||
| general and short-time delay RCD | 0 ms…300 ms | 0 ms…300 ms | 1 ms | ±(2% m.v. + 2 digits) |
| selective RCD | 0 ms…500 ms | 0 ms…500 ms | 1 ms | ±(2% m.v. + 2 digits) |
| Measurement of RCD tripping current IA measuring current 0,3 IΔn…2,0 IΔn | ||||
| for sinusoidal residual current (AC type) | 3.0 mA…500 mA | 3.0 mA…500 mA | from 0.1 mA | ±5% IΔn |
| for unidirectional residual current and unidirectional with the 6 mA DC bias (type A) | 3.5 mA…420 mA | 3.5 mA…420 mA | from 0.1 mA | ±10% IΔn |
| Earth resistance | ||||
| 3-pole method | 0.68 Ω…1999 Ω acc. to IEC 61557-5 | 0.00 Ω…1999 Ω | from 0.01 Ω | from ±(3% m.v. + 5 digits) |
| Insulation resistance | ||||
| Measuring voltage 100 V | 100 kΩ…99.9 MΩ acc. to IEC 61557-2 | 0 kΩ…99.9 MΩ | from 1 kΩ | ±(5% m.v. + 8 digits) |
| Measuring voltage 250 V | 250 kΩ…199.9 MΩ acc. to IEC 61557-2 | 0 kΩ…199.9 MΩ | from 1 kΩ | ±(5% m.v. + 8 digits) |
| Measuring voltage 500 V | 500 kΩ…599.9 MΩ acc. to IEC 61557-2 | 0 kΩ…599.9 MΩ | from 1 kΩ | ±(5% m.v. + 8 digits) |
| Resistance of protective conductors and equipotential bondings | ||||
| Measurement of resistance of protective conductors and equipotential bondings with ±200 mA current | 0.12 Ω…400 Ω acc. to IEC 61557-4 | 0.00 Ω…400 Ω | from 0.01 Ω | ±(2% m.v. + 3 digits) |
| Measurement of resistance with low current | 0.0 Ω…1999 Ω | 0.0 Ω…1999 Ω | from 0.1 Ω | ±(2% m.v. + 3 digits) |
| Phase sequence indication | in the same direction (correct), opposite direction (incorrect), UL-L voltage: 100 V…440 V (45 Hz…65 Hz) |
“m.v.” – measured value
A great little multitasker
The multifunction meter of electrical installation parameters Sonel MPI-507 is a unique model of a handy meter used for precise measurements of electrical installation parameters. In its sleek and compact dimensions, the meter conceals a wealth of measurement functions. An additional advantage of this device is its extremely handy and ergonomic form, which makes it easy to carry and increases the comfort of work.
Reviews
There are no reviews yet.