EVSE-100

Measurement functions	Measurement range	Display range	Resolution	Accuracy
Measurements of mains parameters
Voltage	0 V…500 V	0 V…500 V	from 0.1 V	from ±(2% m.v. + 2 digits)
Frequency	45.0…65.0 Hz	45.0…65.0 Hz	0.1 Hz	±(0.1% m.v. + 1 digit)
Fault loop impedance
Fault loop Z_L-PE, Z_L-N, Z_L-L	from 0.13 Ω…1999 Ω acc. to EN IEC 61557	0.00 Ω…1999 Ω	from 0.01 Ω	±(5% m.v. + 3 digits)
Fault loop Z_L-PE in RCD mode	from 0.5 Ω…1999 Ω acc. to EN IEC 61557	0.00 Ω…1999 Ω	from 0.01 Ω	±(6% m.v. + 5 digits)
Measurements of RCD parameters
RCD tripping test and measurement of tripping time t_A measuring current 0.5 I_Δn, 1 I_Δn, 2 I_Δn, 5 I_Δn	None	None	None	None
• general and short-time delay RCD	0 ms…300 ms	0 ms…300 ms	1 ms	from ±(2% m.v. + 2 digits)
• selective RCD	0 ms…500 ms	0 ms…500 ms	1 ms	from ±(2% m.v. + 2 digits)
• 6 mA DC EV RCD and RCM	0 ms…10.0 s	0 ms…10.0 s	from 1 ms	±(2% m.v. + 3 digits)
Measurement of RCD tripping current I_A measuring current 0.2 I_Δn…2.0 I_Δn	None	None	None	None
• for sinusoidal residual current (AC type)	3.0 mA…500 mA	3.0 mA…500 mA	from 0.1 mA	±5% I_Δn
• for unidirectional residual current and unidirectional with the 6 mA DC bias (type A)	3.5 mA…420 mA	3.5 mA…420 mA	from 0.1 mA	±10% I_Δn
• for direct residual current (type B)	1.0 mA…600 mA	1.0 mA…600 mA	from 0.1 mA	from ±6% I_Δn
Earth resistance
3-pole method	0.85 Ω…1999 Ω acc. to EN IEC 61557-5	0.00 Ω…1999 Ω	from 0.01 Ω	from ±(3% m.v. + 5 digits)
Auxiliary electrodes resistance	0 Ω…1.99 kΩ	0 Ω…19.9 kΩ	from 1 Ω	±(5% (R_S+R_E+R_H) + 8 digits)
Insulation resistance
Measuring voltage 50 V	50 kΩ…49.9 MΩ acc. to EN IEC 61557-2	0 kΩ…49.9 MΩ	from 1 kΩ	±(5% m.v. + 8 digits)
Measuring voltage 100 V	100 kΩ…99.9 MΩ acc. to EN IEC 61557-2	0 kΩ…99.9 MΩ	from 1 kΩ	±(5% m.v. + 8 digits)
Measuring voltage 250 V	250 kΩ…199.9 MΩ acc. to EN IEC 61557-2	0 kΩ…199.9 MΩ	from 1 kΩ	±(5% m.v. + 8 digits)
Measuring voltage 500 V	500 kΩ…599.9 MΩ acc. to EN IEC 61557-2	0 kΩ…599.9 MΩ	from 1 kΩ	±(5% m.v. + 8 digits)
Measuring voltage 1000 V	1000 kΩ…599.9 MΩ acc. to EN IEC 61557-2	0 kΩ…599.9 MΩ	from 1 kΩ	±(8% m.v. + 8 digits)

Measurement functions

Measurement range

Display range

Resolution

Accuracy

Measurements of mains parameters

Voltage

0 V…500 V

from 0.1 V

from ±(2% m.v. + 2 digits)

Frequency

45.0…65.0 Hz

0.1 Hz

±(0.1% m.v. + 1 digit)

Fault loop impedance

Fault loop Z_L-PE, Z_L-N, Z_L-L

from 0.13 Ω…1999 Ω
acc. to EN IEC 61557

0.00 Ω…1999 Ω

from 0.01 Ω

±(5% m.v. + 3 digits)

Fault loop Z_L-PE in RCD mode

from 0.5 Ω…1999 Ω
acc. to EN IEC 61557

0.00 Ω…1999 Ω

from 0.01 Ω

±(6% m.v. + 5 digits)

Measurements of RCD parameters

RCD tripping test and measurement of tripping time t_A
measuring current 0.5 I_Δn, 1 I_Δn, 2 I_Δn, 5 I_Δn

None

• general and short-time delay RCD

0 ms…300 ms

1 ms

from ±(2% m.v. + 2 digits)

• selective RCD

0 ms…500 ms

1 ms

from ±(2% m.v. + 2 digits)

• 6 mA DC EV RCD and RCM

0 ms…10.0 s

from 1 ms

±(2% m.v. + 3 digits)

Measurement of RCD tripping current I_A
measuring current 0.2 I_Δn…2.0 I_Δn

None

• for sinusoidal residual current (AC type)

3.0 mA…500 mA

from 0.1 mA

±5% I_Δn

• for unidirectional residual current and unidirectional with the 6 mA DC bias (type A)

3.5 mA…420 mA

from 0.1 mA

±10% I_Δn

• for direct residual current (type B)

1.0 mA…600 mA

from 0.1 mA

from ±6% I_Δn

Earth resistance

3-pole method

0.85 Ω…1999 Ω
acc. to EN IEC 61557-5

0.00 Ω…1999 Ω

from 0.01 Ω

from ±(3% m.v. + 5 digits)

Auxiliary electrodes resistance

0 Ω…1.99 kΩ

0 Ω…19.9 kΩ

from 1 Ω

±(5% (R_S+R_E+R_H) + 8 digits)

Insulation resistance

Measuring voltage 50 V

50 kΩ…49.9 MΩ
acc. to EN IEC 61557-2

0 kΩ…49.9 MΩ

from 1 kΩ

±(5% m.v. + 8 digits)

Measuring voltage 100 V

100 kΩ…99.9 MΩ
acc. to EN IEC 61557-2

0 kΩ…99.9 MΩ

from 1 kΩ

±(5% m.v. + 8 digits)

Measuring voltage 250 V

250 kΩ…199.9 MΩ
acc. to EN IEC 61557-2

0 kΩ…199.9 MΩ

from 1 kΩ

±(5% m.v. + 8 digits)

Measuring voltage 500 V

500 kΩ…599.9 MΩ
acc. to EN IEC 61557-2

0 kΩ…599.9 MΩ

from 1 kΩ

±(5% m.v. + 8 digits)

Measuring voltage 1000 V

1000 kΩ…599.9 MΩ
acc. to EN IEC 61557-2

0 kΩ…599.9 MΩ

from 1 kΩ

±(8% m.v. + 8 digits)

Description

Comprehensive charging station diagnostics with a single instrument

Multifunctional analyzer EVSE-100 is an instrument dedicated to diagnostics of electric vehicle charging stations and cables. Using a single device, we will perform a set of tests on these objects, ending with the generation of a professional report. Through appropriate simulation of CP and PP circuits, the meter can put the station into various operating states. This allows us to verify the correctness of the control system and perform measurements in the field of electric shock protection. We can complete the verification of functionality and safety by simulating errors on the power supply side, i.e. the charging station (ICCB), and charging side of the vehicle (CP circuit).

Sonel MeasureEffect™

The meter is a part of the Sonel MeasureEffect™ platform. It is a comprehensive system that enables you to take measurements, store and manage data, and provides multi-level control of your instruments.

Applications

The meter makes it possible to carry out diagnostics on:

AC electric vehicle charging stations with type 2 connector with socket or fixed charging cable (1-phase and 3-phase),
portable electric vehicle charging stations with type 2 connector (1-phase and 3-phase),
charging cables.

Basic functions of the device

Simulation of PP cable parameters:
- open circuit,
- 13 A, 20 A, 32 A, 63 A, 80 A.
Simulation of CP communication:
- state A – vehicle not connected,
- state B – vehicle connected, not charging,
- state C – vehicle connected, charging without ventilation.
- state D – vehicle connected, charging with ventilation.
Safety measurements:
- measurement of short circuit loop Z,
- measurement of parameters of RCD circuit breakers (AC, A, B, 6 mA DC),
- measurement of insulation resistance R_ISO,
- measurement of R_CONT,
- phase sequence indication,
- resistance of coding resistor R_C,
- measurements of grounding R_E.
EVSE analysis – diagnostics:
- CP+, CP- voltage,
- frequency f (PWM),
- signal filling D (PWM),
- maximum charging current I_MAX,
- graph of CP+, CP-, f, D, I_MAX,
- t_off off time,
- t_on on time.
EVSE analysis – simulation of errors (ICCB, EVCS):
- CPsh – short circuit of CP to PE,
- Dsh – diode short circuit,
- PEop – interruption in PE.
EVSE analysis –s imulation of power supply circuit faults (ICCB):
- L1op – interruption in phase L1,
- L2op – interruption in phase L2,
- L3op – interruption in phase L3,
- Nop – interruption in N,
- PEop – interruption in PE,
- L↔PE – interchanged L and PE wires,
- U_EXT(PE) – voltage on PE wire.
EVSE analysis – transition time between states.

Description

Brand

Sonel

Reviews

Explore

Contact Us

Contact Us

EVSE-100

Description

Brand

Sonel

Reviews

Related products

MPI-540 + EVSE-01

Explore

Contact Us

Contact Us